My Homepage

{11 Steps to Spray Paint Your Car Like the Professionals - Auto Bodywork Paint Repair

You will be amazed to see only just how to spray on auto paint really might be easy. That doesn't mean that you go at a tin of paint and can simply grab it. There are a few basics you should know. Both in application and the preparation.

Step A:

Prepare by assembling all your things that you're going to need. Be sure your surrounding area is shielded against any possible over aerosol. Any parts that do not need to be sprayed and that could be removed subsequently do thus. For other places cover well with paper and masking tape.

Measure B:

In addition, it makes it possible for the spray auto paint to adhere better. It is imperative the automobile be absolutely clean.

Step C:

You may need to apply a primer. This is going to ensure that you get an overall even coating of your coloured paint helps the paint to adhere well.

Step D:

Now you are pretty well to the point at which you are about ready to spray the colour. You could have chosen to make use of the spray auto paint that comes in aerosol cans, or maybe you might have opted for the spray gun. Either way, make a few practice strokes on an object before you begin with the auto. Once you are prepared, begin the passes with all the paint without hesitation. You will end up with uneven coverage and perhaps the paint will run, if you hold the spray can or gun in a single area. If it happens you've got a major repair job on your had. You'll most likely have directions about the best way to spray on car paint utilizing the equipment or spray cans.

Step E:

It's up to you whether you want to wet sand between coats of primer and color paints. You might need to research this alternative on the internet, or check with someone that's comfortable with the best way to spray on auto paint

Step F:

Once you are completely satisfied with the color, you're down to the finishing touches. You will now desire to apply several layers that are clear. This may give the semblance and concluded look to the car as well as guard the finish. It will be your decision although probably two coatings will be adequate.

Step G:

Once again, you have the option of wet sanding should you like. Again, it is best to request the help of individuals that are familiar with how to spray paint a car. You need alloy wheel refurbishment Manchester to wet sand together with the following grits in this sequence if you choose to follow this step then. Use 800, 1000, 1200, 1500 and the finally the 2000. This may remove spots which may be overly heavy in the clear coating application.

Step H:

Now you will need to using a rubbing compound to help you use a 2000 grit to remove any scratches to buff the surface.

Step I:

You ought to buff the surface. To do that just utilize a moderate cut polish. Once you've completed this, you need to have a perfect glassy look to the finish.

Step J:

As a final touch, you may choose to apply a few layers of wax.

This website was created for free with Would you also like to have your own website?
Sign up for free